Table of Contents
Advertisement
1. Click on the image and the grid will display.
2. Select the grid square in the upper-left of the desired rectangle.
3. Select the grid square in the lower-right of the desired rectangle.
4. The area between upper-left and lower-right grid will be selected.
The same result is achieved from lower left followed by upper right.
5. Choose "Save & Back" to proceed.
How to select motion grid by front panel:
1.
Press Enter key on "Grid Setting" to launch motion grid setting page.
2.
Use Jog/Shuttle to scroll above or below list of buttons to enter the grid setting area.
3.
Press Enter key to display grid.
4.
Use Jog to move up/down and use Shuttle to move left/right, choose one corner of
desired area.
5. Press Enter key at the starting point.
6. Use Jog to move up/down and use Shuttle to move left/right, select motion area; the shape
of the proposed area will be displayed.
Apply To: This button can be used to copy the motion settings to other cameras. Select which cameras
you wish to copy to. "Select All" selects all cameras, "Unselect All" deselects all cameras. Click "OK" to
copy the settings or "Cancel" to exit without copying.
Figure 4-5 Camera Menu – Motion Grid Setting
48
Advertisement
Table of Contents
