Table of Contents
Advertisement
How to select motion grid by mouse:
1. Click on the image and the grid will display.
2. Select the grid square in the upper-left of the desired rectangle.
3. Select the grid square in the lower-right of the desired rectangle.
4. The area between upper-left and lower-right grid will be selected.
The same result is achieved from lower left followed by upper right.
5. Choose "Save & Back" to proceed.
How to select motion grid by front panel: Jog to move up/down and use Shuttle to move left/right
1. Press Enter key on "Grid Setting" to launch motion grid setting page.
2. Use Jog/Shuttle to scroll above or below list of buttons to enter the grid setting area.
3. Press Enter key to display grid.
4. Use Jog to move up/down and use Shuttle to move left/right, choose one corner of desired
area
5. Press Enter key at the starting point.
6. Use Jog to move up/down and use Shuttle to move left/right, select motion area; the shape
of the proposed area will be displayed.
Press Enter key at the end point, and the area will be selected.
Press the Menu key to exit the area selection; use Jog/Shuttle to choose "Save & Back" and press Enter to
proceed.
Click on the "Search" button to start searching. The search results will be shown as a list of events.
35
Advertisement
Table of Contents
