Rear Panel - EverFocus ECOR264-4D2 User Manual

1.5 REAR PANEL

During initial setup you will be connecting your DVR to multiple input and output devices. This is done
through the rear panel.
○
1
○
9
Alarm In: Connect up to 4/8 alarm inputs, selectable between N.O./N.C. contacts.
○
1
Alarm Out: N.C or N.O type alarm out (form "C").
○
2
Audio In: Connect line level output of an audio preamplifier to the audio input connection
○
3
corresponding to the appropriate camera.
Video In: Connect camera's video output or other composite video source to the video input
○
4
connection.
Video Out: Looping Outputs - connect the camera video signals to other equipment as required.
○
5
RS232 socket: 9-pin D-Sub control input for RS-232.
○
6
USB 2.0: USB port recommended for connecting the USB mouse.
○
7
LAN: RJ-45 network connection 10/100 Mbps Ethernet. There are two LEDs on the LAN jack;
○
8
Green LED means network is connected, amber LED flickers when data is being
exchanged.
POWER: Plug the DC 12V power source provided into the power socket.
○
9
○
○
2
○
3
○
10
○
11
Figure 1-2 Rear Panel
○
4
5
○
○
12
6
○
7
○
6 8