4.2 Multiplexer Connection.
MAIN MONITOR OUTPUT
(3)
(1): Multiplexer VCR Out :
This connects to the VIDEO IN connector at the rear panel.
(2) :Multiplexer VCR In :
This connects to the VIDEO OUT 1 connector at the rear panel.
(3) :Multiplexer Main Monitor Output:
This connects to the MUX. MAIN MONITORIN IN connector at the rear panel.
(4) :Step Signal:
This signal is used to synchronize the multiplexer and the video recorder.
(5) :System Main Monitor Out:
Connect the MAIN MONITOR OUTPUT connector to the main monitor.
Please set the Multiplexer item to ON . (NORMAL RECORD SETTING MENU)
(6) :
System Connection
Multiplexer
VCR IN
VCR OUT
(1)
(2)
(5)
10
GND
STEP Signal
(4)
Main Monitor