Hookups - Sony STR-DE545 Operating Instructions Manual

Hide thumbs Also See for STR-DE545:
Table of Contents

Advertisement

Digital
Component
Hookups
=€
8
UD
C
1=
'u
0
®
Connect the digital output
jacks of your DVD player and
satellite
tuner (etc.) to the receiver's
digital input jacks to
bring the multi channel
surround
sound of a movie
theater
into your home. To enjoy full effect of multi
channel
surround
sound,
five speakers
(two front
speakers,
two rear speakers,
and a center speaker)
and a
sub woofer are required.
You can also connect an LD
player
with an RF OUT jack via an RF demodulator,
such
as the Sony MOD-RFI
(not supplied).
Required
cords
0ptical digital cords (not supplied)
Black _"
_
Black
Coaxial digital cord (not supplied)
Yellow
Yellow
Audio/video cords (not supplied)
When connecting
a cord, be sure to match the color-coded
pins to
the appropriate
jacks on the compone]_ts.
TV or Satellite
DVD player (etc.)*
tuner
Yellow (video)
_
Yellow (video)
White (L/audio)_i_i_i
_
White (L/audio)
Bed (R/audio)
Red (R/audio)
Note
The optical and coaxial digital input jacks on the receiver
are
co_npatible
with sampling
frequencies
of 32 kHz, 44.1 kHz, and
48kHz.
* When making digital audio connections
to a DVD player, connect to either the coaxial OR optical digital jacks, and not
both. It is recommended to nu_ke digital audio connections to the coaxial jack,
** STR-DE545 and STR-SE501 only.
Example
of LD player
connected
via an RF demodulator
Please note that you cannot connect an LD player's
AC-3 RF OUT jack directly
to the receiver's
digital input jacks. You
must first convert the RF signal to either an optical or coaxial digital
signal. Connect
the LD player to the RF demod_alator,
then connect the RF demodulator's
optical or coaxial digital
output
to the receiver's
OPTICAL
or COAXIAL DVD/LD
IN
jack. Refer to the instruction
manual
supplied
with your RF Demodulator
for details on AC-3 RF hookups.
I VIDEO OUT
I
LD player
AC-T3RF
I RF dem°dulat°r
I=
Note
DVD/LD
VIDEO IN
DIGITAL
DVD,LO,N
(COAXIAL)
or (OPTICAL)
=_-- _--
!
.__..=_
..
When making
connections
as shown
above, be sure to set INPUT MODE ([_] on page 23) manually. The receiver
may not operate
correctly
if INPUT
MODE is set to "AUTO."
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-de445Str-se501

Table of Contents