Hookup Overview; Antenna Hookups - Sony STR-DE915 Operating Instructions Manual

Getting Started
Unpacking
Check that you received the following items with the
receiver:
'* FM wire antenna (1)
* AM loop antenna (1)
* Remote commander (remote) (1)
RM-P501 (STR-DE915 / DE715 / D660Z only)
RM-U501 (STR-DE615/D560Z only)
* Size AA (R6) batteries (2)
e Audio/video cable (1)
(STR-DE915/DE715 (USA, Canada) only)
* Control 5 cord (1)
(STR-DE915/DE715 (USA, Canada) only)
Inserting batteries into the remote
Insert two size AA (R6) batteries with the + and — on
the battery compartment. When using the remote,
point it at the remote sensor Il on the receiver.
Dr
(F When to replace batteries
Under normal use, the batteries should last for about 6
months. When the remote no longer operates the
receiver, replace both batteries with new ones.
Notes
* Do not leave the remote in an extremely hot or humid
place.
* Do not use a new battery with an old one.
* Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
* If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
NAE AU M а аксу MERECE
Hookup Overview
The receiver allows you to connéct and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the receiver on the pages specified. To
learn the locations and names of each jacks, see "Rear
Panel Descriptions" on page 36.
TV/VCR Hookups (9) Antenna Hookups (5)
Speaker Digital Component AM/FM ant
antenna
System Hookups (10)
Hookups
Video camera
recorder
Audio Component
Hookups (5)
Before you get started
* Turn off the power to all components before making
any connections.
* Do not connect the AC power cords until all of the
connections are completed.
* Be sure to make connections firmly to avoid hum
and noise. .
* When connecting an audio/video cable, be sure to
match the color-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.