There's no sound from a specific component.
Check that the component
is connected
correctly
to
the audio input jacks for that component.
Check that the cord(s) used for the connection
is
(are) fully inserted
into the jacks on both tee
receiver and the component.
No sound
is heard from one of the front
speakers.
Connect a pair of headphones
to the PHONES
jack
and set the SPEAKERS selector to OFF to verify
that sound is output
from the headphones
(see "[_
SPEAKERS selector"
and "PHONES
jack" on page
23).
If only one channel is output
from the headphones,
the component
may not be connected
to the
receiver correctly. Check that all the cords are fully
inserted into the jacks on both the receiver and the
component.
If both channels are output from the headphones,
the front speaker may not be connected
to the
receiver correctly. Check the connection
of the front
speaker which is not outputting
any sound.
If you encounter
a problem
that is not included
above, see
"Troubleshooting"
on page 45.
z
o
O
C
o.
m,
G
"o
Ill
I/i
3
21