Sony RDR-VX555 Operating Instructions Manual page 24

Switch the inputselectoron yourTVsothat
the signal from the recorder appearson
your TV screen.
"Initial setting necessary to operate the DVD
recorder will be made. You can change them
later using setup." appears.
• If this message does not appear, select "Easy
Setup" in the "Setup" display to run Easy
Setup (page 104).
Press ENTER.
The setup display l;.)rselecting the language
used in the on-screen display appears.
Easy Setup -: ....
Select the screenlanguage¸
I/Eng Hsh ]
Fran_ais
Espanol
Easy Setup
Enter the brand code of
your set top box
• To re-enter the code lmmber, select
"Cancel" and return to step 6.
8 Select "ON," and press ENTER.
Easy Setup -: ....
Select the input line that you
connected the set top box to
E,/Liner
]
Line2
Select a language, and press ENTER.
The setup display lk>rcable box/satellite
receiver control appears.
Easy Setup -: ....
Do you want to control
your _t top box with this r_order?
(©hinges to the current getting will
eraso all timer setting8 }
[_°_ I
No
Select whether or notyou use the cable
box/satellite receiver control,and press
ENTER.
If you want to use the cable box/satellite
receiver control (page 12), select "Yes."
If not, select "No." then go to step 10.
Press the number buttonsto enter the
brandcode of yourcable box/satellite
receiver.
See "Cable Box/Satellite Receiver Brand
Code" (page 121).
Select the recorder's audio/videoinput
("Line1" or "Line2") that is connectedto
the cable box/satellitereceiver, andpress
ENTER.
The setup display lk)rclock setting appears.
Easy Setup 12:00 AM
Set t he timeanddatemanually¸
Hour MIn AMiPM
10Press
t/4l, to set the month and press ,,,_.
Set the day, year, hour, minutes, and AM/PM
in the same way, then press ENTER. The day
of the week is set automalically.
The setup display [k)r selecting the picture size
of the connected TV appears.
24