Advertisement
-- Sleep Timer
You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Press SLEEP,
Each time you press the button, the minute
display (the turn-off time) changes cyclically
as
follows:
AUTO* ---* 90MIN ---* 80MIN ---* 70MIN
---* ...---* 10MIN--*
OFF
* The system automatically tmns offin 100 minutes or
ariel the cunent disc or tape finishes playing.
Other
operations
To
Press
Check the
SLEEP once
remaining time*
Change the time
SLEEP repeatedly to select the
to alrn off
time you want.
Cancel the Sleep
SLEEP repeatedly until "SLEEP
Timer Function
OFF" appears.
* You cannot check the remaining
time if you select
"AUTO".
Note
Do not set to "AUTO"
during
Sync_o
Recording
on a
tape.
Tip
You can use the Sleep Timer, even if you have not set
the clock
-- Play Timer
You can wake up to nmsic at a preset time. Make
snre yon have set the clock (see "Setting the
clock" on page 10).
Use buttons on the remote for the operation.
1
Prepare the sound source you want to
play.
• CD: Load a disc. To start from a specific
track, make a program
(see "Creating
your own program"
on page 14).
• Tape: Load a tape with the side von want
to play facing forward.
• Tuner: Tune in the preset radio station
(see "Listening
to the radio" on page 16).
Press VOLUME +/- to adjust the
volume.
2
3
4
6
7
Press CLOCK/TIMER
SET.
Press _
or _
repeatedly
to select
"PLAY SET", then press ENTER.
"ON" appears and the honr indication
flashes.
Set the time to start playing.
Press I'_
or _
repeatedly
to set the
hour, then press ENTER.
The minnte indication
flashes.
Press I'_
or _
repeatedly
to set the
minute, then press ENTER.
Set the time to stop playing following
the same procedure
as step 5.
Press _
or _
repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes
cyclically
as lbllows:
_
TUNER "_*" CD PLAY _
TAPE PLAY "_
.-I
g
continued
25G8
Advertisement
