Before You Use Your Receiver - Sony STR-DE845 Operating Instructions Manual

Notes
• The front balance,
rear balance, center level, and rear level are
shown in the display during adjustment.
• Although these adjustments can also be made via the front
pand using the LEVEL menu (when the test tone is output, the
receiver switches to the LEVEL menu automatically), we
recommend you tollow the procedure described above and
adjust the speaker levels from your listening position using the
remote control.
Before You Use Your
Receiver
Before turning on the receiver
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0).
• Selected the appropriate front speakers (see "[_
SPEAKERS selector" on page 27).
Checking the connections
After connecting all of your components to the receiver,
do the following to verify that the connections were made
correctly.
I/_) Function buttons MASTER VOLUME
&
c
1 Press I/_ to turn on the receiver.
2 Press a function button to select a component
(program source) that you connected (e.g., CD
player or tape deck).
3 Turn on the component and start playing it.
4 Rotate MASTER VOLUME to turn up the volume.
If you do not obtain normal sound output after
performing this procedure, look for the reason in the
checklist on the following page and take the appropriate
measures to correct the problem.
-r
0
0
D
t-
0
'I0
"0
®
g_
3
23