Sony STR-DE845 Operating Instructions Manual page 30

Front Panel Parts Description
r-
o
o
,.k
"o
m
m
__,
0
ik
,q
0
q:
o
[] SET UP button
Press to activate the setup mode_ then use the cursor
buttons ([]1 to select any of tile fl_llowmg parameters.
You can make various settings using the jog dial (_),
When you select You can
Speaker setup Specify the front, center, rear speaker
sizes, the rear speaker position, and
whether or not you are using a sub
wooter _page 19).
Speaker Distance Specity the front, center, and rear speaker
distances and the unit of measurement
(page 21).
Crossover Specity the front, center, and rear speaker
frequency* bass crossover frequency (page 22).
5.1CH video input Specify the video input to be used with
the audio signals from the 5.1CH INPU'F
jacks (page 11).
Auto Function Specity whether or not Sony components
connected via Control At cords will turn
on or off when selected using the
function buttons (page 50).
2 way remote Turn on or oft response to remote
(STR-DE945 only) signals sent from the 2 way remote (page
50).
OSD color Specify
the color of the on-screen
(STR-DE945 only) display (page 51 ).
Dimmer Range Specie, the display to turn oft when you
press the DIMMER button several times
(page 51).
* Only wJw, the speakel is set to"SMALL" in the speaker setup
parameter.
@
@
[]
[]
[]
N
[]
NAME button
Press to activate the name function and enter names
for preset stations and program sources (page 48)
ENTER button
Press to enter individual characters for tbe preset
station and program source names.
Cursor buttons (<1>)
Press to select
various speaker level, surround, and
equalizer parameters (etc.).
Jog dial
Turn to adjust the selected speaker level, surround,
and equalizer parameters (etc.).
EQ button
Press to activate the equalizer parameters (page 40).
The indicator on the button lights up and you can
adjust the various equalizer parameters.
SUR button
Press to activate the surround parameters (page 38).
The indicator on the button lights up and you can
adjust the various surround parameters (effect level,
wall type, etc.).
LEVELbutton
Press to activate the speaker level parameters (page
39). The indicator on the button lights up and you can
adjust the various speaker level parameters (front
balance, rear balance, etc.).
30