Before You Use Your Receiver - Sony STR-DB925 Operating Instructions Manual

Before You Use Your Receiver

Before turning on the receiver
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0).
• Selected the appropriate front speakers (see "8
SPEAKERS selector" on page 23).
• Set BALANCE to the center position.
Clearing the receiver's memory
Before you use your receiver for the first time or when
you want to clear the receiver's memory, do the following.
1/u
DISPLAY
MULTI CHANNEL DECODING
VIDEO 1 VIDEO 2 VIDEO 3 DVD TV/LD
SPEAKERS DISPLAY
A
OFF B
A + B TUNING/
MEMORY FM MODE – PTY SELECT + PTY – RDS – EON
PRESET TUNING
– +
VIDEO 3 INPUT CURSOR
PHONES
MODE
SHIFT FM/AM
S-VIDEO VIDEO L AUDIO R
1
Turn off the receiver.
2
While pressing down DISPLAY and SOUND FIELD
ON/OFF, press 1/u to turn on the receiver.
The demonstration appears in the display and the
items including the following are reset or cleared:
• All preset stations are reset or cleared.
• All sound field parameters are reset to their factory
settings.
• All index names (of preset stations and program
sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each program source
and preset stations are cleared.
SOUND FIELD
ON/OFF
MASTER VOLUME
TAPE MD/DAT CD TUNER PHONO
SOUND FIELD
EQ
BASS BOOST
FUNCTION
EQ 5.1 INPUT
SURROUND ON/OFF INPUT MODE
EQUALIZER BALANCE
INDEX MODE MUTING
SET UP SOUND FIELD
GENRE MODE ON/OFF
L R
Checking the connections
After connecting all of your components to the receiver,
do the following to verify that the connections were made
correctly.
1/u
MULTI CHANNEL DECODING
VIDEO 1 VIDEO 2 VIDEO 3 DVD TV/LD
SPEAKERS DISPLAY
A
OFF B
+
A B TUNING/
MEMORY FM MODE – PTY SELECT + PTY – RDS – EON
PRESET TUNING
– +
CURSOR
PHONES VIDEO 3 INPUT
SHIFT FM/AM MODE
S-VIDEO VIDEO L AUDIO R
1
Press 1/u to turn on the receiver.
2
Rotate FUNCTION to select a component (program
source) that you connected (e.g., CD player or tape
deck).
3
Turn on the component and start playing it.
4
Rotate MASTER VOLUME to turn up the volume.
If you do not obtain normal sound output after
performing this procedure, look for the reason in the
following checklist and take the appropriate measures to
correct the problem.
There is no sound no matter which component is
selected.
/ Check that both the receiver and all components
are turned on.
/ Check that the MASTER VOLUME control is not
set at 0.
/ Check that the SPEAKERS selector is not set to
OFF or to a position for front speakers that are not
connected to the receiver (see "8 SPEAKERS
selector" on page 23).
/ Check that all speaker cords are connected
correctly.
/ Press the MUTING button to turn off the indicator
to the left of the button.
MASTER VOLUME
MASTER VOLUME
TAPE MD/DAT CD TUNER PHONO
SOUND FIELD
EQ
BASS BOOST
FUNCTION
EQ 5.1 INPUT
SURROUND ON/OFF INPUT MODE
BALANCE
EQUALIZER
MODE MUTING
INDEX
SET UP SOUND FIELD
GENRE MODE ON/OFF L R
FUNCTION
19 GB