"_°. If you have a digital component such as an amplifier
with a digital connector, DAT or MD
Connect the component
via the DIGITAL OUT OPTICAL
or COAXIAL connector
using an optical or coaxial digital
connecting
cord (not supplied).
When you play a DVD, set "DIGITAL OUT" in "INITIAL
SETUP 2" to "PCM" in the setup display. (page 35)
•
When using an optical digital connecting cord
Optical digital connecting cord
(not supplied)
Take off the cap and plug in the optical digital connecting
cord.
Amplifier with a
digital connector, MD
CD/DVD player
deck, DAT deck, etc.
DIGITAL IN
0PT_L
"_;If
your TV has an S-link connector
You can control the CD/DVD
player
from the TV.
Connect the TV via the S-LINK connector
using the S-link
cable (supplied).
Refer to the instructions
supplied
with
the TV to be connected.
Audio/Video/S-link
cord
(supplied)
S-link
_
S-link
CD/DVD player
TV
• When usinga coaxial digital connecting cord
Coaxial digital connecting cord
(not supplied)
CD/DVD player
DIGITAL OUT J
Notes
Amplifier
with a
digital connector, MD
deck, DAT deck, etc.
•
Refer to the instructions
supplied
with the component
to be connected.
* You cannot make digital audio recordings
of discs
recorded
in Dolby Digital (AC-3) format directly using
an MD deck or DAT deck.
When you make the connections above, do not set
"DIGITAL OUT" in "INITIAL SETUP 2" to =DOLBY
DIGITAL/PCM."
If you do, a loud noise will
suddenly come out from the speakers, affecting
your ears or causing the speakers to be damaged.
S EN