Table of Contents
Advertisement
Specifying the speaker distance
1
Press SET UP and select "@ 1", then press ENTER.
2
Select the speaker you want to adjust in
"DISTANCE" and press ENTEIL
3
Adjust the value using 4' / _, then press ENTER.
Note
When you set the distance, the sound cuts off for a moment.
You can vary the distance of each speaker as follows.
Default adjustments
are in the brackets.
• Front speaker (12fL 3.7m)
• Front speaker distance can be set in I foot (0.3 meter)
steps from 4 to 50 feets (1.2 to 15.2 meters).
• If both speakers are not placed an equal distance
from your listening position, set the distance of the
closest speaker.
• Center speaker (12ft. 3.7m)
Center speaker distance can be set in I foot (0.3 meter)
steps from a distance equal to the front speaker
distance to a distance 4 feets (1.2 meter) closer to your
listening position.
Note
Do not place the center speaker farther away from your
listening position than the front speakers.
• Rear speaker (10ft. 3.0m)
• Rear speaker distance can be set in I foot (0.3 meter)
steps from a distance equal to the front speaker
distance to a distance 16 feets (4.9 meters) closer to
your listening position.
• If both speakers are not placed an equal distance
from your listening position, set the distance of the
closest speaker.
Note
Do not place the rear speaker farther away from your
listening
position than the front speakers.
Adjusting the speaker volume
1
While you stop playback, press SET UP and select
"_ 2",thenpressENTEIL
2
Set "TEST TONE" to "ON."
You will hear the test tone from each speaker in
sequence.
3
From your listening p_sition,
adjust the value of
"BALANCE"
and "LEVEL" using 4' / _, and
ENTER.
During this adjustment, the test tone is emitted
from both speakers simultaneously.
4
Set "TEST TONE" to "OFF" to turn off the test
tone.
5.1
OUTPUT
SETUP
2
BALANCE
LEVEL
RE][]B-r_
QUIT
[_[]
Note
While you are playing a disc, you cannot here the test tone.
You can vary the balance
and the level of each speaker
as follows.
Default adjustments
are in the brackets.
• Front speaker balance (0dR)
Adjustthebalance between thefront left a nd fight
speakers(-SdB[L]~+8dB [R], 0,5riB steps).
• Rearspeaker balance (0dB)
Adjustthebalance between therearleft a nd right
speakers
(-8dB [L] -+8dB [R], 0,5dB steps).
• Center speakerlevel (OdB)
Adjust the level of the center speaker (-20dB ~+6dB,
0,SdBsteps).
• Rear speaker level (OdB)
Adjust the level of the rear speakers
(-20dB ~+6dB,
0,5dB steps).
• Sub woofer level (OdB)
Adjust the level of the sub woofer (-lOdB -+6dB, 0,5dB
steps).
The test tone does not be output from the
subwoofer.
To adjust the volume of all the speakers at one time.
Use the amplifier's volume control.
To return to the default setting
Select the sybol or the item, then press CLEAR.
39 EN
Advertisement
Table of Contents
