Table of Contents
Advertisement
Stopping playback, Search,Slow-motion Play, Repeat
Play, Shuffle Play or Program Play, etc., cannot be done.
_l_Depending on the disc, you may not do some of
the operations above.
Messagesdo not appear on the TVscreen in the language
you want.
,,.bin the setup display,
select the language for the
on-screen display in "OSD" under
"LANGUAGE SETUP." (page 33)
The language for the soundcannot be changed when you
play a DVD.
,,,_Multilingual
sound is not recorded on the DVD.
,,,_Changing
the language for the sound is
prohibited on the DVD.
The language for the sound changesautomatically.
,,.bWhen you set the "TRACK SELECTION" in
"INITIAL
SETUP 2" to "ON" in the setup
display,
the language may change depending
on the "AUDIO" settings in "LANGUAGE
SETUP." The "TRACK SELECTION" setting
has higher priority than that of "AUDIO"
settings. (page 33)
The language for the subtitles cannot be changed when
you play a DVD.
-,_Multilingual
subtitles are not recorded on the
DVD.
-.bChanging
the language for the subtitles is
prohibited on the DVD.
Thesubtitles cannot be turned off when you play a DVD.
,,_Depending
onthe DVD, you may not be able to
turn the subtitles off.
The anglescannot be changed when you play a DVD.
,-bMulti-angles are not recorded on the DVD.
•-I_Change the angles when "ANGLE"
appears on
the front panel display. (page 27)
,_Changing
the angles is prohibited on the DVD.
The aspectratio of the screencannot be changed even
though you set "TV TYPE" in "INITIAL SETUP1" in the
setup display when you play a wide picture.
"#'The aspect ratio is fixed on your DVD.
,-bIf you connect the player with the S video cable,
connect directly to the TV. Otherwise,
you may
not change the aspect ratio.
-'_Depending
on the TV, you may not change the
aspect ratio.
The menu screendoes not appear when you play a VIDEO
CD.
•._The VIDEO CD does not feature PBC functions.
,-bFollow
the correct operating procedure.
(Also
refer to the instructions supplied
with the disc.)
The sound loses stereo effect when you play a VIDEO_'D _
or a CD.
_"I/L"
or "2/R"
appears on the front panel
display.
On the remote, press AUDIO CHANGE
repeatedly
until "1/L 2/R"
appears. (page 2'6)
,,.lI, M ake sure you connect the player
appropriately.
(page '10, 11)
The surround effect is difficult to hear when youare
playing a Dolby Digital (AC-3) sound track.
,-bCheck the speaker connections
and settings.
(page 37) Refer to the operating manual oLyour
amplifier.
•,,_Set "MODE"
in "5.1 OUTPUt
SETUP 2" to
"OFF" in setup display. (page 40)
,,,_Depending
on the DVD, the output signal may
not be the entire 5.1 channel but monaural or
stereo even if the sound track is recorded
in
Dolby Digital (AC-3) format.
The sound comesfrom the center speaker only.
•,_Set "MODE"
in "5.1 OUTPUT
SETUP 2" to
"OFF" in setup display. (page 40)
-,bDepending
on the disc, the sound may come
from the center speaker only.
Theplayer does not operate properly.
,,,_'Static electricity,
etc., may affect the player's
operation.
Disconnect
the AC power cord once, then
connect it again.
The numbersor letters of 5 charactersare displayed on
the screen.
,_Self
diagnosis
function was activated. See the
table in page 45 and treat the player
appropriately.
44
EN
Advertisement
Table of Contents
