Table of Contents
Advertisement
To display tile playing channels
You can display the playing channels on the screen.
In Dolby Digital (AC-3) format, the signals from
monaural to 5.1 channel can be recorded on a DVD.
Depending
on the DVD the numbers of the recorded
channels
are different.
®$I18
®®
®®®
o
C:)(_C:)C_
DISPLAY
S:
Rear (monaural) - the rear component
of
the Pro Logic processed
stereo signal.
LFE:
- displayed
only when the LFE (Low
Frequency
Effects) signal is playing
If "S" is displayed
in gray, you can enjoy the surround
effect when you set "MODE"
under "5.1 OUTPUT
SETUP 2" to "PRO L_DGIC," "VES A" br "VES B" in
the setup display.
This affects only when the current
audio format is "DOLBY DIGITAL 2/0."
The display examples are as follows:
•PCM (stereo)
Press DISPLAY repeatedly until the channel display
appears.
Current
format*
• PRo LOGIC (PCM)
Current
ring
channel**
• Dolby Digital (AC-3) 5.1ch
"PCM", "MPEG" or "DOLBY DIGITAL" is
displayed.
In "DOLBY DIGITAL" case, the
channels
in the playing track are displayed
by
number as follows:
The case of Dolby Digital (AC-3) 5.1 ch:
Rearcomponent 2
DOLBY,
D,G,TAL _/_._
Front component 2
LFEcomponent 1
+ Center component I
"_° You can find Dolby Surround-encoded
software by
looking at the packaging
Use discs with the 1_3Q , l_ _ logo. In order to enjoy Dolby
Digital (AC-3) playback you must use discs bearing this
logo.
Note
The DOLBY DIGITAL indicator turns off when:
- you insert a CD or a VIDEO CD.
- the current audio format is PCM or MPEG Audio.
The playing channel shows the signals from 5.1
OUTPUT connectors whether the speakers exist or
not. The letters in the channel display mean the
following:
L:
Front (L)
R:
Front (R)
C:
Center (monaural)
LS:
Rear (L)
RS:
Rear (R)
41 EN
Advertisement
Table of Contents
