Creating A Disc With A Recorder, Etc - Sony Handycam DCR-SX40 Operating Manual

Creating a disc with a
recorder, etc.
You can dub images played back on your
camcorder to a disc or video cassette,
by connecting your camcorder to a disc
recorder, a Sony DVD writer other than
DVDirect Express, ect., with the A/V
connecting cable. Connect the device
in either way of [] or []. Refer also to
the instruction manuals supplied with
the devices to be connected. Select the
recording media that contains movies you
want to dub before starting the operation
(p. 37).
• Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor lbr this
operation (p. 13).
[] A/V connecting cable (Supplied)
Connect the A/V connecting cable to the
input jacks of another device.
[] AN connecting cable with SVIDEO (sold
separately)
When connecting to another device
via the S VIDE() jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher quality images can
be produced than with an A/V connecting
cable. Connect tire white and red plug
(left/right audio) and the S VIDEO plug
(S VIDE() channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect the S VIDEO plug only, you will
hear no sound. The yellow plug (video)
connection is not necessar)_
A/V Remote
Connector
A/V R
(Yellow)
Input
S VIDEO
@
VIDEO
@_
(Yellow)
(White)
:>
AUDIO
g>
(Red)
-m
Signal flow
Insertthe recording media in the
recording device.
• If your recording device has an input
selector, set it to the input mode.
Connectyour camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable [] (supplied) or an A/V
connecting cable with SVlDEO
[] (sold separately).
• Colmect your calncorder to the input jacks
of the recording device.