Sony Handycam DCR-SX40 Operating Manual page 13

• When )Tourcamcorder is on, you can check the approximate amount of remaining batter), power with the
remaining batter), indicator at the upper left on the LCD screen.
To remove the battery pack
(;lose the LCD screen. Slide the BATT (batter},) release lever @ and remove the batter}, pack
®.
To use a wall outlet (wall socket) as a power source
Make the same connections as "Step 1: Charging the batter}, pack."
Notes on the battery pack and the AC Adaptor
• When you remove the hattery pack or disconnect the AC Adaptor, close the LCD screen and make sure
that the 1_ (Movie)/O (Photo) lamps (p. 14) are turned of_L
• Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a malfunction.
• In the deflmlt setting, the power turns off automatically if you leave ),our camcorder without any
operation for about 5 minutes, to save battery power ([A.SHUT OFF]).
63
You can charge the battery pack in any countries!regions using the AC Adaptor Supplied with
your camcorder within the AC 100 V: 240 V, 50 Hz/60 Hz range.
, Do not use an electronic voltage transformer.
_3