Creating A Standard Definition Image Quality (Std) Disc With A Recorder, Etc - Sony NXCAM HXR-NX70E Operating Manual

Creating a standard
definition image
quality (STD) disc with
a recorder, etc.
You can copy images played back on your
camcorder on a disc or video cassette,
by connecting your camcorder to a disc
recorder, a Sony DVD writer, etc., other
than DVDirect Express, with the A/V
connecting cable. Connect the device in
either way of  or . Refer also to the
instruction manuals supplied with the
devices to be connected.

Notes
Connect your camcorder to the wall outlet (wall

socket) using the supplied AC Adaptor for this
operation (p. 19).
Sony DVD writer may not be available in some

countries/regions.
High definition image quality (HD) movies

will be copied with standard definition image
quality (STD).
GB
0
Input
(Yellow)
Signal flow
 A/V connecting cable (supplied)
 A/V connecting cable with S VIDEO
(sold separately)
By using this cable, higher quality images
can be produced than with an A/V
connecting cable. Connect the white
and red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDEO
cable. If you connect the S VIDEO plug
only, you will hear no sound. The yellow
plug (video) connection is not necessary.
1
Insert the recording media in the
recording device.
If your recording device has an input

selector, set it to the input mode.
A/V Remote Connector
S VIDEO
VIDEO
(Yellow)
(White)
AUDIO
(Red)