Dashboard Display Functions - Snapper Prestige 2800GT SERIES Operator's Manual

Features& Controls
DASHBOARD DISPLAY
(SELECT MODELS)
Display Items
Refer to Figures 3a and 3b.
A. FUEL LEVEL
Indicates the amount of fuel in the fuel tank. Left is
empty; right is full.
B. HOUR METER / CLOCK / SERVICE INDICATOR
Displays the clock, hour meter, and maintenance
reminder.
C. SELECT BUTTON
Used to set the clock and reset the maintenance
reminder.
D. SET BUTTON
Used to set the clock and reset the maintenance
reminder.
E. PTO LIGHT
Indicates the PTO switch is in the ON position.
F. CRUISE CONTROL LIGHT
Indicates that the cruise control is engaged.
G. LOW OIL PRESSURE LIGHT
Indicates that the engine oil pressure is low. The light
will turn on when the tractor is first started and then go
out. IF THIS LIGHT TURNS ON WHILE THE TRACTOR
IS IN USE, TURN THE ENGINE OFF IMMEDIATELY.
Contact your authorized dealer for service.
H. LOW VOLTAGE LIGHT
Indicates that the electrical system voltage is low. The
light will turn on when the tractor is first started and then
go out. IF THIS LIGHT TURNS ON WHILE THE TRAC-
TOR IS IN USE, TURN THE ENGINE OFF IMMEDIATE-
LY. Contact your authorized dealer for service.
Functions
EARLY MODELS (SEE FIGURE 3A)
Display Total Running Hours - When the key switch is
first turned to the RUN position, all warning indicators will
light and the total running hours will be displayed. Be
sure all lights are functioning.
Display PTO Hours - Turn the key OFF, engage the
PTO, and turn the key to RUN (engine off).
Set the Clock - Press and release the select button (C)
to select hours or minutes. Depress the set button (D) to
advance the selected number.
Demonstration Mode - Turn the key OFF, depress and
hold the set button (D, Figure 3), turn the key to RUN
and release the set button.
o _
Figure 3a. Dashboard Display - Early Models
Figure 3b. Dashboard Display - Later Models
Maintenance Reminder - A maintenance reminder will
display in the information window (B) after the first 5
hours of operation, and then after every 50 hours. The
reminder will automatically reset after 5 hours.
LATER MODELS (SEE FIGURE 3B)
Display Total Running Hours - When the key switch is
first turned to the RUN position, all warning indicators will
light and the total running hours will be displayed. Be
sure all lights are functioning.
Display PTO Hours - Turn the key OFF, engage the
PTO, and turn the key to RUN (engine off).
Set the Clock - Press and release the select button (C)
to select hours or minutes. Depress the set button (D) to
advance the selected number.
Demonstration Mode - With the engine off, hold down
the set button (D) and turn the key switch to RUN.
Maintenance Reminder - A maintenance reminder will
display in the information window (B) after the first 5
hours of operation, and then after every 50 hours. The
reminder will automatically reset after 5 hours. The
reminder can be manually reset by turning the key switch
from OFF to RUN (with engine off) and then depressing
the set (D) and select (C) buttons simultaneously for 5
seconds.
11