Dashboard Display Functions - Snapper 2690628 Operator's Manual

Features & Cefltrols
Dashboard Display Functions
The dashboard display shows a variety of engine opera-
tion and control status information, as explained in the
descriptions below.
A. Irregular Voltage
Indicates that the voltage being produced by the charg-
ing system and battery is higher or lower than normal
levels.
B, Rear PTO Light
Indicates that the optional rear PTO is engaged.
C. Mid (Front) PTO Light
Indicates that the mid PTO is engaged.
D. Hour Meter/Clock
Displays number of hours the unit has been operated.
E. Cruise Control Light
Indicates that the cruise control is engaged.
R Low Oil Pressure Light
Indicates that the engine oil pressure is low. If this indi-
cator lights, shut the engine off immediately and contact
your dealer.
G, 4 Wheel Drive Light (4WD Models Only)
Indicates that 4 wheel drive is engaged.
H. Fuel Separator Full Light
Indicates that the fuel separator is full and must be emp-
tied.
l. Fuel Gauge
The fuel gauge shows the level of fuel in the fuel tank.
J. Tachometer
Displays the engine RPM. Normal operating speed is
3400 RPM. Do not operate at less than 3000 RPM dur-
ing normal use.
K. Coolant Temperature
Shows the engine coolant temperature.
L. Glow Plug Light
Indicates that the glow plugs are heating. Leave the key
in the run position until the light goes out, then turn the
key to start.
I
® @ G
13