Features And Controls; Control Functions - Snapper Zero Turn Rider Operator's Manual

IMPORTaNT
The figures and illustrations
in this manual are provided
for reference only and may
differ from your specific
model. Contact your dealer
if you have questions.

control functions

The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing
require the combined use of several controls applied in specific sequences. To learn what combination and sequence
of controls to use for various tasks see the Operation section.
Ground Speed Levers
These levers control the ground speed and direc-
tion of the rider. The left lever controls the left rear drive
wheel and the right controls the right rear drive wheel.
Moving a lever forward increases the FORWARD speed
of the associated wheel, and pulling back on a lever
increases the REVERSE speed.
The further a lever is moved away from the neutral posi-
tion the faster the drive wheel will turn.
See the Operation section for steering instructions.
en

features and controls

choke control
Move the choke control to the CHOKE position to
start a cold engine. A warm engine may not require chok-
ing.
Engine Speed control
Move the engine speed control to the FAST
position to increase engine speed, and to the SLOW
position to decrease engine speed.
NOTE: Always operate the rider with the engine speed
control in the FAST position.
13