Setting Up The Remote To Operate Your Dvd; Setting Up The Remote To Operate Your Set Top Box - Samsung LN-S4095D Owner's Instructions Manual

®®®
®
0 0 0
CZ3 tED OK3 _
k )
Setting Up the Remote to Operate Your DVD
1. Turn off your DVD.
2. Press the DVD button on your TV's remote control.
3. Press the SET button on your TV's remote control.
4. Using the number buttons on your remote control, enter three digits of the DVD code listed on
pages 26,--27 of this manual for your brand of DVD. Make sum you enter three digits of the code,
even if the first digit is a "0". (If more than one code is listed, tU the first one.)
5. Press the POWERrO button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes
listed fiJr your brand of DVD. If no other codes are listed, tU each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in "DVD" mode, the volume buttons still control your TV's volume.
@.=-'.-0
I®®®I
A_A CH_ FAVCH ES_NG
0000
0 0 0
OSEr ()tflEr
\ Ms..s
k j
Setting Up the Remote to Operate Your Set Top Box
i 1. Turn off your STB.
2_ Press t $1 buttoll o]_your TV's remote control
3. Press the SET button on your TV's remote control.
4. Using the number buttons on your remote control, enter three digits of the STB code listed on
page 27 of this manual for your brand of STB. Make sure you enter three digits of the code, even
if'the first digit is a "0". (If' more than one code is listed, try the first one.)
_. Press the POWERrO button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes
listed for your brand of STB. If no other codes are listed, tU each code, 000 through 074.
Note on Using Remote Control Modes: STB
When your remote control is in "STB" mode, the volume buttons still control your TV's volume.
English-24