Table of Contents
Advertisement
C h a p t e r 4
S
F
P E C I A L
E AT U R E S
Customizing Your Remote Control
Your TV comes equipped with a "universal" remote control. In addition to
controlling the TV, the universal remote can also operate a VCR, DVD and a cable box
(even if your VCR and cable box are made by manufacturers other than Samsung).
Note: The remote control might not be compatible with all DVD Players, VCRs and Cable boxes.
Setting Up Your Remote Control to Operate Your VCR (or DVD)
1
Turn off your VCR (or
DVD.)
2
Press the MODE button and make sure that the VCR (or
DVD) LED is illuminated.
3
On your Samsung remote control, press the SET button.
4
Enter 3 digits of the VCR (or DVD) code listed on the next
page for your brand of VCR (or DVD).
5
Press the POWER button on the remote control. Your VCR
(or DVD) should turn on. If your VCR (or DVD) turns on, your
remote control is now set correctly.
6
Once your remote control is set up, press the MODE button
any time you want to use the remote to operate your VCR (or
DVD).
"modes": "TV," "VCR", "Cable" and
"DVD." Press the "MODE" button
to switch the remote control to the
"VCR" (or DVD) mode.
code, even if the first digit is a "0."
If more than one code listed, try the
first one.
ENG 4.1
The remote control has four
Make sure you enter 3 digits of the
If your VCR (or DVD) does not
turn on, repeat steps 2, 3, and 4, but
try one of the other codes listed for
the brand of your particular VCR (or
DVD).
If no other codes are listed, try each
code, 000 through 089.
When your remote control is in
the "VCR" (or DVD) mode, the volume
buttons still control your TV' s volume.
When your remote is in the "TV"
mode, the VCR control buttons (PLAY,
PAUSE, etc.) will still operate your
VCR.
Advertisement
Table of Contents
