Changing The Channel Of The Sub (Pip) Picture - Samsung LN-S4095D Owner's Instructions Manual

Changing the Channel of the Sub (PIP) Picture
After you set the signal source (antenlm or cable) of the sub picture, it is easy to change channels.
Press the MENU button. Press the 4 or p, button to select "PIP",
then press the ENTER _ button.
Press the . .or . .button to se.ect"Channe.", then press the
........................................ ENTER _ button.
Press the A or v button to select a channel you want, then press the
ENTER _ button.
Air :"Air" antenna signal
CATV "CATV" antenna signal
Select "Return" by pressing the A or _, button, then press the
ENTER _ button to return to the previous menu.
Press the EXIT button to exit.
Alternate method
Press the OH /x or CH v button under the cover of the remote control to change
the sub picture channels while PIP is on.
R_ S.M_E
_._
SILL P,SlZE
© RE_
English-50