Disconnecting The Stand; [] Installingthe Stana - Samsung LN32A300U User Manual

Disconnecting the Stand
1, Remove four screws from the back of the TV.
2, Separate the stand from the TV.
>- Two or more people should carry the TV.
3, Cover the bottom hole with the cover.
Installing the Stand
When installing the stand, use the provided components and parts.
>- Components
Stand (1 EA) Cover Neck (1 EA) Guide Stand (1 EA) O Screws (3 EA) _ Screws (4 EA)
Front
Position O .....
1. insert the Cover Neck into the groove of the stand. Assemble the LCD TV stand by aligning the triangle figures
indicated by the arrow marks.
2. Place the Guide Stand onto the stand which is assembled in step1 and fasten it using the three 0 screws.
3. Connect your LCD TV and the stand.
4. Fasten two _ screws at position 0 and then fasten two _) screws at position 0.
>- Make sure to distinguish between the front and back of each component when assembling them.
>- Make sure that at least two persons lift and move the LCD TV.
>- Stand the product up and fasten the screws.
If you fasten the screws with the LCD TV placed down, it may lean to one side.