Channel Control
Clearing Scrambled Channels - Digital
The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed.
This process may take up to 20_30 minutes.
1,
Press the MENU button to display the menu.
Press the A or T button to select "Channel", then press the ENTER c_ button.
2_
Press the A or T button to select "Clear Scrambled Channel", then press the
ENTER _ button.
It searches scrambled channels, which are to be removed from the list.
_To stop searching scrambled channels:
Press the ENTER _
button to select Stop.
Press the _ button to select "Yes", then press the ENTER _
button.
3_
When the scrambled channel searching is completed, press the ENTER
button.
Press the EXiT button to exit.
> This function is only available in "Cable" mode.