Table of Contents
Advertisement
Oj_tion 2: 8ettinq the Clock Automatically:
The Clock can be set automatically if you are receiving a digital signal.
t, Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER _
button.
Press the A or T button to select "Time", then press the ENTER I:_ button.
2.
Press the ENTER _
button to select "Clock".
3.
Press the ENTER _
button to select "Clock Mode".
Press the A or T button to select "Auto", then press the ENTER _
button.
4.
Press the A or T button to select "Time Zone", then press the ENTER _
button.
&
Press the A or T button to highlight the time zone for your local area,
then press the ENTER _
button.
6_
Press the A or T button to select "DST", then press the ENTER _
button.
Press the A or T button to select "Off' or "On", then press the ENTER _
button.
Press the EXIT button to exit.
:_
Depending on the broadcast station and signal, the auto time may not be
set correctly. If this occurs, set the time manually.
The Antenna or cable must be connected in order to set the time automatically.
Advertisement
Table of Contents
