RRP 7.1 Chute Assembly Exit (PL 7.1.1)
Removal
1.
Remove the Front Cover (RRP 1.1).
2.
Remove the Front Left Cover (RRP 1.11).
3.
Disconnect P/J131 and shift the harness to the side of the Chute Assembly Out.
4.
Remove the 2 screws, the upper screw is attached to the static discharge harness,
securing the Chute Assembly Exit to the Chute Assembly Out.
FRU Disassembly - Removal and Replacement Procedures
S6200-129
187