Table of Contents
Advertisement
Indicator
Button Descriptions for TV Mode
GO,DE
Arrows
Used to highlight
different
items in the IV menu and to adjust the menu
controls.
Indicator
Indicates the programming
mode when programming
the remote to
control components.
Lights when you press a valid button
on the remote. Flickers
when a button
is pressed and the batteries are low.
(0-9) Number Buttons
Enter channel numbers and time settings directly
through
the remote control.
To enter a one-digit
channel, enter a zero first. To enter a two-digit
channel, press
the two digits and expect a few seconds delay. This is if you want to enter a third
digit.
CC
Toggles closed captioning
on and off.
CH+orCH-
Seans up or down through the current channel list. Press once to
change the channel up or down; press and hold to continue changing
channels.
CLEAR
Removes any menu or display from the screen and returns you to normal
viewing.
GO BACK
Returns you to the previous channel.
INFO
Brings up the channel banner.
INPUT
Toggles through
the available input sources (VlD1/SVlD1/CVID1,
FRNT,and
current channel).
MENU
Brings up the Main menu.
MUTE
Reduces the Iv's volume to its minimum
level. Press again to restore the
volume.
OK
When in the menu system, selects highlighted
items.
ONeOFF
When in IV mode, turns the 1V on and off. If in another mode {VCR,
DVD, etc.) and programmed,
will turn the component
on and off.
PRESETS Picture options are reset to original
factory settings.
SKIP
Press once before changing
channels and the IV will wait 30 seconds before
returning
to the original
channel. Press repeatedly to add more time.
TV
Turns on the IV and puts the remote in TV mode. Also displays current status.
VOL - or VOL +
Decreases or increases the IV's volume.
Button Descriptions for DVD and VCR Modes
AGAIN
In DVD mode, replays the last several seconds of the title you're playing.
ANTENNA
In VCR mode, functions
as a IV/VCR button.
DVD
Puts the remote in DVD mode and, if auto tuning is enabled, will turn on
the TV and tune to the correct video input channel. Also used with the ONoOFF
button to turn on other compatible
DVD players.
GUIDE
If you're operating another component
that has an on-screen program
guide, this button
accesses the on-screen guide.
Chapter 2
Graphics contained
within this publication
are for representation
only.
9
Advertisement
Table of Contents
