Chapter 2: Using The Remote Control; Button Descriptions For Tv Mode; Button Descriptions For Dvd And Vcr Modes - RCA 35V432T User Manual

Indicator

Button Descriptions for TV Mode

Arrows Used to highlight different items in the TV menu and to adjust the menu
ON OFF
DVD
controls.
VCR TV
Indicator Indicates the programming mode when programming the remote to
control components. Lights when you press a valid button on the remote. Flickers
CH
VOL
when a button is pressed and the batteries are low.
MUTE GO BACK
(0-9) Number Buttons Enter channel numbers and time settings directly
through the remote control.
CLEAR
MENU
OK OK
To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press
the two digits and expect a few seconds delay. This is if you want to enter a third
SKIP
PRESETS
digit.
CC INFO
GUIDE
1 2 3
CC Toggles closed captioning on and off.
4 5 6
CH + or CH - Scans up or down through the current channel list. Press once to
7
8 9
change the channel up or down; press and hold to continue changing channels.
INPUT ANTENNA
0
CLEAR Removes any menu or display from the screen and returns you to normal
REVERSE FORWARD
PLAY
viewing.
RECORD STOP PAUSE
GO BACK Returns you to the previous channel.
AGAIN ZOOM
OPEN CLOSE
SPEED
SEARCH INFO Brings up the channel banner.
INPUT Toggles through the available input sources (VID1/SVID1/CVID1, FRNT, and
current channel).
MENU Brings up the Main menu.
MUTE Reduces the TV's volume to its minimum level. Press again to restore the
volume.
OK When in the menu system, selects highlighted items.
ON•OFF When in TV mode, turns the TV on and off. If in another mode (VCR,
DVD, etc.) and programmed, will turn the component on and off.
PRESETS Picture options are reset to original factory settings.
SKIP Press once before changing channels and the TV will wait 30 seconds before
returning to the original channel. Press repeatedly to add more time.
TV Turns on the TV and puts the remote in TV mode. Also displays current status.
VOL – or VOL + Decreases or increases the TV's volume.

Button Descriptions for DVD and VCR Modes

AGAIN In DVD mode, replays the last several seconds of the title you're playing.
ANTENNA In VCR mode, functions as a TV/VCR button.
DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on
the TV and tune to the correct video input channel. Also used with the ON•OFF
button to turn on other compatible DVD players.
GUIDE If you're operating another component that has an on-screen program
guide, this button accesses the on-screen guide.
Chapter 2
Graphics contained within this publication are for representation only.

Chapter 2: Using the Remote Control

9