Table of Contents
Advertisement
Indicator
i_ _ _
Button Descriptions for IV Mode
Arrows
Used to highlight
different
items in the IV menu and to adjust the menu
controls.
Indicator
Indicates the programming mode when programming the remote to
control components. Lights when you pressa valid button on the remote. Flickers
when a button is pressedand the batteries are low.
(0-9} Number Buttons
Enter channel numbers and time settings directly
through the remote control.
To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press
the two digits and expect a few seconds delay. This is if you want to enter a third
digit.
CH + or CH -
Scans up or down through the current channel list. Press once to
change the channel up or down; press and hold to continue changing channels.
CLEAR Removes any menu or display from the screen and returns you to normal
viewing.
GO BACK Returns you to the previous channeL
INFO Brings up the channel banner.
INPUT Toggles through the available input sources (VID1/SVIDI, VID2/CVID2,
FRNT, V PORTandcurrent channel).
MENU
Brings up the Main menu.
MUTE
Reduces the IV's volume to its minimum
level. Press again to restore the
volume.
OK
When in the menu system, selects highlighted items.
ONoOFF
When in IV mode, turns the IV on and off. If in another mode (VCR,
DVD,etc.) and programmed, will turn the component on and off.
PRESETS Brings upsound and picture presets.
SKIP Press once before changing channels and the IV will wait 30 seconds before
returning to the original channel. Press repeatedly to add more time.
IV
Turns on the IV and puts the remote in IV mode. Also displays current status.
VPORT
Tunes the IV to the VPORTinput channel. You can program this button
to control a VCRor DVDplayer. When programmed, changes the mode of the
remote when the button is pressed. To restore the VPORTbutton to factory default
mode (unprogrammed), press and hold VPORT, t hen press I, 0, 0, and O.
VOL - or VOL +
Decreases or increases the IV's volume.
Button
Descriptions
for
DVD and V(2R Modes
AGAIN
In DVD mode, replays the last several seconds of the title you're playing.
ANTENNA
In VCR mode, functions
as a IV/VCR button.
DVD
Puts the remote in DVD mode and, if auto tuning is enabled, will turn on
the IV and tune to the correct video input channel.
GUIDE
If you're operating
another component
that has a guide, this button
accesses the on-screen
Guide.
Chapter 2
Graphics contained
within this publication
are for representation
only.
9
Advertisement
Table of Contents
