Setup Menu - RCA 32V430TYX1GYN User Manual

Using the Menu System
Auto Color Turn this option on to automatically correct the color of the picture.
This is especially useful for tracking realistic flesh tone colors as you switch
channels.
Color Warmth Press the right arrow to scroll through the color adjustments: Cool
for a more blue palette of picture colors; Normal; and Warm for a more red palette
of picture colors.
Brightness Adjusts the brightness of the picture.
Contrast Adjusts the difference between the light and dark areas of the picture.
Color Adjusts the richness of the color.
Sharpness Adjusts the crispness of the edges in the picture.
Note:Sharpnessis not available for component videoinput channel (CVtD1).
Tint Adjusts the balance between the red and green levels.
Note: Tintis not available for component videoinput channel (CVtD1).
When you change any of these picture settings, the Picture Preset changes to
Personal Use the left or right arrow button to make adjustments. To return to the
PICTURE menu, press the up or down arrow button.
Tilt (Not available on model 27R430T) Your TV has an extra large picture tube
that makes it vulnerable to the effects of the Earth's magnetic field. You may need
to adjust the picture tilt.
Setup Menu
Auto Ch. Search (Auto Channel Search) Allows you to
choose your signal type and begin an auto channel search.
Signal Type Press the left or right arrow to toggle
between the signal your TV is receiving. Choose Cable if
you are currently using cable or a cable box for TV
signals. Choose Antenna if you are currently using an
off-air antenna for TV signals.
Start Searches for channels the signal is receiving and
stores them in the TV's channel list. Go to page 8 for
more information.
List Ef Labels Edit the channels in the list or choose labels
for each channel. For example, if channel 12 is NBC, you can
use this feature to label it NBCso it appears on-screen as
part of the Channel Banner.
To delete a channel from the channel list, highlight Channel
and use the left or right arrow button to select the channel.
Then highlight In listand press the OK button. The box
should no longer display a check mark.
To add a label to a channel, select the channel in the Channel
option. Press the down arrow button to highlight Label. Press
the right arrow button to highlight the first space. Use the
up or down arrow button to ascend or descend through the
characters. Continue to press the right arrow button to
highlight the space and the up or down arrow button to add
a character. Press OK when you're finished adding a label.
Chapter 4
Graphics contained within this publication are for representation only.
23