Table of Contents
Advertisement
Indicator
Button Descriptions for TV Mode
Arrows
Used to highlight
different
items in the TV menu and to adjust the menu
controls.
Indicator
Indicates the programming
mode when programming
the remote to
control components.
Lights when you press a valid button
on the remote. Flickers
when a button
is pressed and the batteries are low.
{0-9) Number Buttons
Enter channel numbers and time settings directly
through the remote control.
To enter a one-digit
channel, enter a zero first. To enter a two-digit
channel, press
the two digits and expect a few seconds delay. This is if you want to enter a third
digit.
CH + or CH -
Scans up or down through the current channel list. Press once to
change the channel up or down; press and hold to continue
changing
channels.
CLEAR
Removes any menu or display from the screen and returns you to normal
viewing.
GO BACK
Returns you to the previous channel.
INFO
Brings up the channel banner.
INPUT
Toggles through
the available input sources (VID1/SVID1, VID2/CVID2,
FRNT, VPORTand current channel).
MENU
Brings up the Main menu.
MUTE
Reduces the TV's volume to its minimum
level. Press again to restore the
volume.
OK
When in the menu system, selects highlighted
items.
ONeOFF
When in TV mode, turns the TV on and off. If in another mode (VCR,
DVD, etc.) and programmed,
will turn the component
on and off.
PRESETS Brings up sound and picture presets.
SKIP
Press once before changing channels and the TV will wait 30 seconds before
returning
to the original
channel. Press repeatedly to add more time.
TV
Turns on the TV and puts the remote in TV mode. Also displays current status.
VPORT
Tunes the TV to the VPORT input channel. You can program this button
to control a VCR or DVD player. When programmed,
changes the mode of the
remote when the button
is pressed. To restore the VPORT button
to factory default
mode (unprogrammed),
press and hold VPORT, then press 1, O,O, and O.
VOL - or VOL +
Decreases or increases the TV's volume.
Button Descriptions for DVD and VCR Modes
AGAIN
In DVD mode, replays the last several seconds of the title you're playing,
ANTENNA
In VCR mode, functions
as a 1V/VCR button,
DVD
Puts the remote in DVD mode and, if auto tuning
is enabled, will turn on
the 1V and tune to the correct video input channel,
GUIDE
Ifyou're
operating another component
that has a guide, thisbutton
accesses the on-screen Guide.
Chapter 2
Graphics contained
within
this publication
are for representation
only.
9
Advertisement
Table of Contents
