Ink Cartridge Safety - Epson Stylus NX625 Series Quick Manual

Ink Cartridge Safety

■
Keep ink cartridges out of the reach of children and do not drink the ink.
■
Be careful when you handle used ink cartridges; there may be ink remaining around
the ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets
in your eyes, flush them immediately with water. If discomfort or vision problems
remain after a thorough flushing, see a doctor immediately.
■
Do not shake ink cartridges after opening their packages; this can cause leakage.
■
Do not put your hand inside the product or touch any cartridges during printing.
■
Install a new ink cartridge immediately after removing an expended one. Leaving
cartridges uninstalled can dry out the print head and may prevent the product from
printing.
■
If you remove an ink cartridge for later use, protect the ink supply area from dirt and
dust and store it in the same environment as the product. Note that there is a valve in
the ink supply port, making covers or plugs unnecessary, but care is needed to prevent
the ink from staining items that the cartridge touches. Do not touch the ink cartridge
ink supply port or surrounding area. Do not store cartridges upside down.
■
Shake new ink cartridges four or five times before opening their packages.
■
Do not remove or tear the label on the cartridge; this can cause leakage.
■
Install the ink cartridge immediately after you remove it from its package. If you leave
a cartridge unpacked for a long time before using it, normal printing may not be
possible.
■
Do not disassemble or remodel the ink cartridge, otherwise you may not be able to
print normally.
■
After bringing an ink cartridge inside from a cold storage site, allow it to warm up at
room temperature for at least three hours before using it.
■
Store ink cartridges in a cool, dark place.
■
Do not touch the green IC chip on the side of the cartridge. Doing so may prevent
normal operation and printing.
53
Notices