Epson Stylus NX625 Series Quick Manual page 30

Setting Up With a Temporary USB Cable
Do not connect the USB cable to your product until instructed to do so in the
on-screen instructions.
1. Wait while the software is installed.
2. When you see this screen, connect the product to your computer with a USB
cable.
3. Follow the on-screen instructions to continue installing the software.
4. When you see the Firewall Warning screen, click
Note:
If you see a firewall alert message, click Unblock or Allow to let EpsonNet Setup
continue. Do not select Ask Me Later, Keep Blocking, or Block.
30
Wireless Network Setup
.
Next