Operating Problems - Zanussi ZWQ 5100 User Manual

Top-loading washing machine
Hide thumbs Also See for ZWQ 5100:
Table of Contents

Advertisement

1
2
Drainage filter
Clean the filter located at the base of the appliance regu-
larly :
1

Operating Problems

Numerous checks were carried out on your appliance be-
fore it left the factory. However, should you notice a mal-
Problems
The washing machine
doesn't start or doesn't fill:
The appliance fills but emp-
ties straight away:
The washing machine
doesn't rinse or doesn't emp-
ty:
www.zanussi.com
3
4
3
2
• the appliance isn't plugged in correctly, the electrical installation isn't working,
there is a power failure,
• the lid of your appliance and the drum shutters aren't closed firmly,
• the programme start command hasn't been properly selected,
• the water supply has been cut off, the water inlet tap is closed,
• the water inlet filters are dirty,
• a red tab appears on the water inlet hose
• the drainage U-piece is fixed too low (see installation section).
• the drain hose is blocked or bent,
• the drainage filter is obstructed,
• the out of balance detector has been activated : washing is unevenly distributed in
the drum,
• the "Drain" programme or "Night Silence Plus" or "Rinse hold" option have been
selected,
• the height of the drainage U-piece is unsuitable.
5
4
Water inlet filters
To clean, proceed as follows :
function, please refer to the sections below before contact-
ing the after-sales service.
Causes
1)
.
7
6
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents