What To Do If - Electrolux EWH 127310 W User Manual

20 electrolux
3. screw the water inlet hoses back on and
reposition the emergency emptying
hose after having refit the cap on.
By doing this, any water remaining in the ma-
chine is removed, avoiding ice forming and
consequently damage to the appliance.
When you use the machine again, make
sure that the ambient temperature is above
0°C.

WHAT TO DO IF...

Certain problems are due to lack of simple
maintenance or oversights, which can be
solved easily without calling out an engi-
neer. Before contacting your local Service
Centre, please carry out the checks listed
below.
During machine operation it is possible that
the red pilot light of button 6 blinks, one of
the following alarm codes appears on the
display and at the same some acoustic sig-
Problem
The washing machine does
not start:
The machine does not fill:
Important! Every time you drain the water
through the emergency emptying hose you
must pour 2 litres of water into the main
wash compartment of the detergent drawer
and then run the drain programme. This will
activate the ECO Valve device avoiding
that part of the detergent remains unused
at next washing.
nals sound every 20 seconds to indicate
that the machine is not working:
•
•
•
Once the problem has been eliminated,
press the button 6 to restart the pro-
gramme. If after all checks, the problem per-
sists, contact your local Service Centre.
Possible cause/Solution
The door has not been closed.
• Close firmly the door.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and the button 6 has
not been depressed.
• Please turn the selector dial and press the button 6 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The Child Safety Lock has been activated.
• Deactivate this device.
The water taps are closed.
• Open the water taps.
The inlet hoses are squashed or kinked.
• Check the inlet hoses connection.
The filters in the inlet hoses or the inlet valve filters are
blocked.
• Clean the water inlet filters (See "Cleaning the water inlet filters"
for more details).
The door is not properly closed.
• Close firmly the door.
: problem with the water supply.
: problem with the water draining.
: door open.