ECS P67H2-A2 Manual page 53

Chipset Configuration
Scroll to this item to view the following screen:
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset M.I.B III
Memory Multiplier Configuration
Memory Mutiplier
Memory Timing Configuration
CAS# Latency (tCL)
Row Precharge Time (tRP)
RAS# to CAS# Delay (tRCD)
RAS# Active Time (tRAS)
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Memory Multiplier Configuration
This item shows the information of Memory Multiplier Configuration.
CAS# Latency (tCL) (7)
This item determines the operation of DDR SDRAM memory CAS (colulmn address
strobe). It is recommanded that you leave this item at the default values. The 2T
setting requires faster memory that specifically supports this mode.
Row Precharge Time(tRP) (7)
This item specifies Row precharge to Active or Auto-Refresh of the same bank.
RAS# to CAS# Delay(tRCD) (7)
This item specifies the RAS# to CAS# delay to Rd/Wr command to the same bank.
RAS# Active Time(tRAS) (20)
This item specifies the RAS# active time.
Press <Esc> to return to the M.I.B III menu page.
Press <Esc> to return to the M.I.B III menu page.
Boot Security Save & Exit
Memory Mutiplier
[10.67]
:Select Item
7 Enter : Select
+/- : Change Opt.
7
7 F1:General Help
20
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Using BIOS
45
:Select Screen