ECS P67H2-A2 Manual page 25

USB3F: Front Panel USB 3.0 headers.
This Motherboard implements one USB 3.0 header supporting 2 extra front USB 3.0
ports, which delivers 5Gb/s transfer rate. USB3F supports EZ Charger technology,
provides about 1A current than general USB port in off mode for USB devices. It is
useful and excellent, especially for the iPhone, iPad and iPod touch devices that need
a large amount of current for faster recharging within less time.
It is suggested that USB Keyboard and USB Mouse connect to USB 2.0 ports rather
than USB 3.0 ports. Wake up function from S1/S3 may not be supported by those
devices that connect to USB 3.0 ports. USB devices connected to USB 3.0 ports may
not be supported in DOS mode.
Pin Signal Name
1
Vbus
2
IntA_P1_SSRX-
3
IntA_P2_SSRX+
4
GND
5
IntA_P1_SSTX-
6
IntA_P1_SSTX+
7
GND
8
IntA_P1_D-
9
IntA_P1_D+
10
ID USBOC-
11
IntA_P2_D+
12
IntA_P2_D-
13
GND
14
IntA_P2_SSTX+
15
IntA_P2_SSTX-
16
GND
17
IntA_P2_SSRX+
18
IntA_P2_SSRX-
19
Vbus
Please make sure that the USB cable has the same pin assignment as
indicated above. A different pin assignment may cause damage or system
hang-up.
ME_UNLOCK: ME Unlock Header
Pin 1-2 Function
Short Unlock
Open Lock
Installing the Motherboard
Function
Front Panel USB Power
USB3 ICC Port1 SuperSpeed Rx-
USB3 ICC Port1 SuperSpeed Rx+
GND
USB3 ICC Port1 SuperSpeed Tx-
USB3 ICC Port1 SuperSpeed Tx+
GND
USB3 ICC Port1 D-
USB3 ICC Port1 D+
Over Current Protection
USB3 ICC Port2 D+
USB3 ICC Port2 D-
GND
USB3 ICC Port2 SuperSpeed Tx+
USB3 ICC Port2 SuperSpeed Tx-
GND
USB3 ICC Port2 SuperSpeed Rx+
USB3 ICC Port2 SuperSpeed Rx-
Front Panel USB Power
17