Connecting I/O Devices - ECS P67H2-A2 Manual

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:
PS/2 Keyboard/Mouse
Connect the PS/2 Keyboard or PS/2 Mouse to the PS/2
Combo Port combo port.
Use the CLR_CMOS button to clear CMOS.
CLR_CMOS Button
Before clearing CMOS, make sure to turn off the power
of the system.
eSATA 6 Gb/s ports Use these ports to connect to external SATA boxes or
Serial ATA port multipliers.
LAN Ports
Connect an RJ-45 jack to the LAN port to connect your
computer to the Network.
USB 2.0 Ports Use the USB 2.0 ports to connect USB 2.0 devices.
USB 3.0 Ports Use the USB 3.0 ports to connect USB 3.0 devices.
This jack connects to external optical digital audio out-
Optical SPDIF Output
put devices.
Use the audio jacks to connect audio devices. The C port
Audio Ports
is for stereo line-in signal, while the E port is for micro-
phone in signal. This motherboard supports audio de-
vices that correspond to the A, B, and D port respec-
tively. In addition, both of the 2 ports, B, and D provide
users with both right & left channels individually. Users
please refer to the following note for specific port func-
tion definition.
The above port definition can be changed to audio input
or audio output by changing the driver utility setting.
Installing the Motherboard
A: Center & Woofer D: Front Out
B: Back Surround E: M ic_in Rear
C: Line-in
19
-