Eco - Yamaha RX-V373 Owner's Manual

_]
Adjustment
Adjusts the delay between video and audio output manually when "Select" is set to
"Manual". You can fine-adjust the audio output timing when "Select" is set to "Auto".
Setting range
0 ms to 250 ms (1 ms increments)
Default
0 me
Volume
Configures the volume settings.
rl Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Settings
Maximum (default) Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Sets the dynamic range for clear sound even at night or at low volumes
Min/Auto When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
rl Max Volume
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
[3 Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
Off (default)
Mute
-80.0 dB to +16.5 dB
(0.5 dB increments)
Sets the level to the volume level of the unit when it last entered
standby mode.
Sets the unit to mute the audio output.
Sets the level to the specified volume level.
ECO
Configures the power supply settings.
Auto Power Down
Sets the amount of time for the auto-standby function. If you do not operate the unit for
the specified time, the unit will automatically go into standby mode.
Settings
Off Does not set the unit to standby mode automatically.
2 hours, 4 hours, Sets the unit to standby mode when you have not operated the unit for
8 hours, 12 hours the specified time. For example, when "2 hours" is selected, the unit
will switch to standby mode if you do not operate it for 2 hours.
Default
U.K. and Europe models: 8 hours
Other models: Off
• Just before the unit enters standby mode, "AutoPowerDown" appears and then countdown starts in the
front display.
CONFIGURATIONS • Configuring various functions(Setup menu) I
En
62