Setupmenu Items - Yamaha RX-V373 Owner's Manual

Setupmenu items
Subwoofer Selects whether or not a subwoofer is connected. 57
Front Selects the size of the front speakers. 57
Center Selects whether or not a center speaker is connected and its size. 57
Configuration Surround Selects whether or not surround speakers are connected and their size. 57
Crossover Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to "Small". 57
Speaker Subwoofer Phase Sets the phase of the subwoofer. 58
Extra Bass Sets the speakers to produce the front channel low-frequency components. 58
Distance Sets the distance between each speaker and listening position. 58
Level Adjusts the volume of each speaker. 58
Equalizer Adjusts the tone with an equalizer. 58
Test Tone Enables/disables the test tone output. 59
HDMI Control Enables/disables HDMI Control. 59
Audio Output Selects a device to output audio. 59
TV Audio Input Selects an audio input jack of the unit to be used for TV audio input. 60
HDMI Configuration
Standby Sync Selects whether to use HDMI control to link the standby behavior of the TV and the unit. 60
ARC Enables/disables ARC. 60
SCENE Enables/disables SCENE link playback. 60
Panorama Enables/disables the broadening effect of the front sound field. 61
Center Width Adjusts the broadening effect of the center sound field. 61
DSP Parameter
Dimension Adjusts tile difference in level between tile front and surround sound fields. 61
Center Image Adjusts the center orientation level (broadening effect) of the front sound field. 61
Sound Select Selects the method to adjust the delay between video and audio output. 61
Lipsync
Adjustment Adjusts tile delay between video and audio output manually. 62
Dynamic Flange Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 62
Volume Max Volume Sets the maximum volume to prevent excessive loudness. 62
Initial Volume Sets the initial volume for when this receiver is turned on. 62
Auto Power Down Sets the amount of time for the auto-standby function. 62
ECO
ECO Mode Enables/disables the eco mode (power saving mode). 63
CONFIGURATIONS • Configuring various functions(Setup menu) I En 55