Advertisement
Quick Reference Guide
Accessories
The following accessories are supplied with this product.
Remote control
Batteries (2) (AAA, R03, UM-4)
Preparing the remote control
1
3
3
2 2
Items necessary for connection
Speakers
Ex.
Front speaker
• Use speakers with an impedance of at least 6Ω.
• If you are using a CRT TV, we recommend that you use magnetically shielded speakers.
• Prepare at least two speakers (for front). The priority of the other speakers is as follows:
1 Two surround speakers
2 One center speaker
External components
TV
AM loop antenna
1
Take off the battery compartment cover.
2
Insert the two supplied AAA batteries into the battery case, following the polarity
markings.
3
Snap the battery compartment cover back into place.
Center speaker
Playback device such as BD
(Blu-ray Disc)/DVD players
Indoor FM antenna
Ex.
Surround speaker
Cable
• Cables for connecting external components
(may differ depending on the devices you are connecting)
• Speaker cables
(a quantity to match the number of speakers you are connecting)
• Audio pin cable
(for subwoofer)
- 1 -
VIDEO AUX input cover
YPAO microphone
Ex.
Active subwoofer
English
for Europe
Ex.
Advertisement
Table of Contents
Related Manuals for Yamaha RX-V371BL
Summary of Contents for Yamaha RX-V371BL
-
Page 1: Preparing The Remote Control
• Use speakers with an impedance of at least 6Ω. • If you are using a CRT TV, we recommend that you use magnetically shielded speakers. • Prepare at least two speakers (for front). The priority of the other speakers is as follows: 1 Two surround speakers... - Page 2 Connect and install as follows the fi rst time you use this unit. See the following explanations for the connections for each number. BD/DVD player (recorder) This unit Front speaker R Front Subwoofer speaker L Surround speaker R Center speaker...
-
Page 3: Connect The Speakers
Surround speaker Front speaker Caution: • Remove the AC power cord of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. -
Page 4: Listening To Tv Audio
Connect a TV Video input to this unit is output to a TV using output jacks of the same kind. Input Output HDMI HDMI When you have made connections using different types of video HDMI input such as HDMI and component video, make the same connection... -
Page 5: Connect Ac Power Cord, Turn Power On
• Connecting to AV3 allows you to select the AV3 input just by pressing the “CD” under “SCENE” key. • If necessary, you can connect components that cannot be connected using the above methods, such as devices that output video from component video output jacks and audio from analog output jacks. -
Page 6: Set Up The Speaker Parameters Automatically (Ypao)
When using YPAO, be careful of the following. • The test tone is output at high volume. Please refrain from using this function at night when it may be a nuisance to others nearby. • Please take care that the test tone does not frighten any small children. - Page 7 Connect the YPAO microphone to the YPAO MIC jack on the front panel. RECEIVER A YPAO microphone DOCK DOCK “MIC ON. YPAO START” appears on the front panel display, and then changes to display the following. YPAO VOL. Press [SETUP] SETUP This completes preparations.
-
Page 8: Operation Guide
- Pressing and holding this key allows you to store input sources/sound fi eld programs. - Press this key when this unit is in standby mode to switch on the unit. Adjusting high/low-frequency sound (Tone control) Press TONE CONTROL to select “Treble” or “Bass.”...