Connecting Recording Devices; Connecting The Power Cable - Yamaha RX-V373 Owner's Manual

__DRecordlng device connections _ Power cable connection _
You can connect video/audio recording devices to the AV OUT and AUDIO OUT jacks.
These jacks output analog video/audio signals selected as the input.
• To copy video/audio from a video device, connect the video device to the AV 5 jacks or VIDEO AUX
(VIDEO/AUDIO) jacks of the unit.
• To copy audio from an audio device, connect the audio device to the AV 5 jacks, AUDIO 1-2 jacks, or
VIDEO AUX (AUDIO) jacks of the unit.
• Be sure to use the AV OUT and AUDIO OUT jacks only for connecting recording devices.
Video/audio input
AV OUT jacks
The unit (rear)
Video recording
device
Before connecting the power cable (General model only)
Set the switch position of VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110-120/220-240 V, 50/60 Hz.
• Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC
wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a
potential fire hazard.
VOLTAGE SELECTOR
The unit (rear)
AUDIO OUT jacks Audio input
Audio
recording
device
After all the connections are complete, plug in the power cable.
The unit (rear)
To an AC wall outlet
PREPARATIONS • Connecting recording devices I En 27