Options; Modifiers - Whirlpool duet WFW9451XW00 Use & Care Manual

Options
You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all options are
available with all cycles. Available options will glow amber.
Current selections will glow green. If an option is unavailable with
a selected cycle, the light will not illuminate.
DelayWash
0
TumbleFresh
ODeepClean OPreSoak _ Loud
©©
Off
©
Cycle
Sigaal
_tt0n Soun_ 0n/0f_
H01d f or 3 se_
See the "Laundry Guide" for an overview of possible options
for each Wash Cycle selection.
You can select more than one option for a cycle. Some
options cannot be added to some cycles. If an option is
unavailable with a selected cycle, there will be 3 short tones,
and the light for that option will not glow when selected.
Delay Wash
To begin the wash cycle later, select DELAY WASH until the
desired delay time (in hours) shows in the Estimated Time
Remaining display, and then select START. The countdown to the
wash cycle will show in the display window, and the button
indicator will blink until the cycle begins.
IMPORTANT: When delaying a cycle, use only powdered
detergents in the main wash compartment since liquid detergents
may seep out of the compartment during Delay Wash, before the
wash cycle begins.
Modifiers
Preset cycle settings of Water Temp, Spin Speed, Soil Level, and
Rinse can be changed. You can change a modifier after starting a
cycle anytime before the selected modifier begins. Not all
modifiers are available with all cycles and options. Available
options will glow amber. Current selections will glow green. If a
modifier is unavailable with a selected cycle, the light will not
illuminate.
NOTE: The panel shown below may be different from that of your
model.
Hot Medium • Heavy _e Skin Care
Warm Low Normal 1®Extra
Cold NoSpin Light k.®Normal
Water T emp
A(( C old
Rinses
Spin Soi!
Speed Level
Rinse
To change the water temperature, select the WATER TEMP
button until the desired setting glows green.
To change the spin speed, select the SPIN SPEED button until
the desired setting glows green.
To change cycle time, select SOIL LEVEL button until the
desired setting glows green.
To change the rinse, select RINSE button until the desired
setting glows green.
TumbleFresh
TM
option
Use this option when you are not able to remove your clothes
soon after the wash cycle ends. This option provides periodic
tumbling for up to 6 hours to help freshen your clothes. During
this time the "done" indicator remains activated, the door
remains locked and the TumbleFresh
TM
indicator light will flash.
The TumbleFresh
TM
option will automatically stop and the door
lock will be released after this time expires, or if you press cancel
at anytime to unload your laundry.
Deep Clean
Use this option for heavily soiled loads that need improved stain
treatment, loads with multiple types of stains, or loads you
suspect as having stains, but are afraid may have been missed
(no sorting or searching for stains). When Deep Clean is selected,
the water temperature of the selected wash cycle is automatically
set to warm. The water will then be slowly heated to the
temperature selected, to aid in stain removal. This option will
provide optimal removal of organic stains such as blood and
grass.
WaterTemp
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils may be difficult to remove.
6TH SENSE ° Technology
The 6TH SENSE _ Technology control electronically senses and
maintains a uniform water temperature. 6TH SENSE _ Technology
control regulates incoming hot and cold water. 6TH SENSE #_
Technology control is automatically turned on when a cycle is
selected. See "Preset Cycle Settings" in "Cycles." 6TH SENSE e_
Technology control ensures consistent cleaning.
• 6TH SENSE _Technology control works for all wash
temperature settings.
Pre Soak
Use this option for loads of heavily soiled items that need
pretreatment.
• Add detergent to Main Wash compartment of the dispenser
drawer.
This option adds tumbling time prior to the selected main cycle.
The washer continues automatically from presoak into the main
wash cycle.
Cycle Signal
This signal is helpful when you are removing items from the
washer as soon as it stops. Press CYCLE SIGNAL to select Loud,
Soft, or Off. To activate/deactivate button sound hold cycle signal
button for 3 seconds.
serise _
technology
Rinse
Extra Rinse
An extra rinse can be used to aid the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the normal rinse.
Max Rinse
This option provides the best rinse level to allow for even better
detergent removal.
16