Installation Requirements; Tools And Parts; Options - Whirlpool duet WFW9451XW Use & Care Manual

Tools and Parts

Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
■ Pliers (that open to 1 9 /
16
■ Flashlight (optional)
Tools needed for connecting the drain hose
■ Locking pliers (that open to 1
Tools needed for installation
■ Open end wrenches 17 mm and 13 mm
■ Level
■
Wood block
■ Ruler or measuring tape
NOTE: Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Record hose installation or replacement dates for
future reference.
Parts supplied:
A
D E
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Transport bolt hole plug (4)
E. Beaded tie strap
F. Drain hose
G. Hose clamp
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free
number on the cover or in the "Assistance or Service" section.
If You Have You Will Need to Buy
Laundry tub or Sump pump system (if not already
standpipe taller available)
than 96" (2.4 m)
Overhead sewer Standard 20 gal. (76 L), 30" (762 mm)
tall drain tub or utility sink and sump
pump (available from local plumbing
suppliers)
Floor drain Siphon break, Part Number 285834;
additional drain hose Part Number
8318155; and connector kit, Part
Number 285835
Drain hose too 4 ft (1.2 m) drain hose extension kit,
short Part Number 285863
4

INSTALLATION REQUIREMENTS

" [39.5 mm])
9 / " [39.5 mm])
16
B
C
F
If You Have
Water faucets
beyond reach of
fill hoses
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (254 mm) or a
15.5" (394 mm) pedestal. These pedestals will add to the total
height of the washer for a total height of approximately
48" (1219 mm) or 53.5" (1359 mm).
G
To order, call the dealer from whom you purchased your washer
or refer to the "Assistance or Service" section.
Pedestal
Height
10" (254 mm)
10" (254 mm)
10" (254 mm)
15.5" (394 mm)
15.5" (394 mm)
15.5" (394 mm)
15.5" (394 mm)
15.5" (394 mm)
15.5" (394 mm)
15.5" (394 mm)
15.5" (394 mm)
Stack Kit
Are you planning to stack your washer and dryer? To do so you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the "Assistance or Service" section. Ask for Part
Number 8541503.
You Will Need to Buy
2 longer water fill hoses: 6 ft (1.8 m)
Part Number 76314, 10 ft (3.0 m)
Part Number 350008

Options

A B
A. 10" (254 mm) pedestal
B. 15.5" (394 mm) pedestal
Color
White
Black
Diamond Dust (Silver)
White
Black
Diamond Dust (Silver)
New Aspen (Light Green)
Tuscan Chestnut
Ocean Blue
Cranberry Red
Lunar Silver
Part Number
WHP1000SQ
WHP1000SB
WHP1000SU
XHP1550VW
XHP1550VB
XHP1550VU
XHP1550VA
XHP1550VC
XHP1550VE
XHP1550WR
XHP1550WL