The Freezer Shelves; Removing The Freezer Basket; Changing The Light Bulbs - Whirlpool ED25PWXTW00 Use & Care Manual

Rt.=moving and adjusting the freezer shelves...
LIFT THE RIGHT SIDE,
THEN SLIDE OUT.
To remove the shelf:
1. Lift right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order
To adjust the shelf:
1. Remove shelf.
2. Remove supports by sliding upwards.
3. Replace supports on desired level.
4. Replace shelf.
NOTE: The cup shaped supports go in the back
of the freezer.
Removing the freezer basket...
To remove the basket:
1. SLide basket out to the stop.
2. Lift the front to clear the stop.
3, Slide out the rest of the way,
To replace the basket:
1. Place basket on the slides.
2. Make sure the wire stops clear the front of the
slides.
3. Slide basket in.
PULL OUT TO THE STOP,
LIFT, THEN PULL AGAIN.
Changing the light bulbs...
To change refrigerator light:
1. Reach behind the control console to find bulb.
2. Remove bulb.
3. Replace with a 40-watt tubular appliance bulb.
To change upper freezer light:
1. Pull top of light shield up and out.
2. Remove bulb.
3. Replace with a 40-watt tubular appliance bulb.
4. Replace the light shield.
To change light behind crisper:
1. Grasp front of light shield.
2. Lift front of shelf up and pull shield out.
3. Remove bulb.
4. Replace with 40-watt appliance bulb.
5. Replace light shield.
To change lower freezer light:
1. Push in sides of _ight shield until it snaps free.
2. Replace bulb with a 40-watt appliance bulb.
3. Replace the light shield.
To change ice dispenser light:
1. Reach for the bulb through the dispenser area.
2. Replace with a heavy duty 10-watt bulb.