Using Your Refrigerator; Setting The Controls; Changing The Control Settings; Power Saver Control - Whirlpool ED25PWXTW00 Use & Care Manual

Using your refrigerator
FREEZER CONTROL REFRIGERATOR CONTROL
Setting the controls...
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for the
first time,..
1,
2,
Set the REFRIGERA- B
TOR CONTROL to 3.
Set the FREEZER
CONTROL TO B.
POWER SAVER CONTROL
LIGHT SWITCH
Give the refrigerator time to cool down completely
before adding food. (This may take several hours.)
These settings should be about right for normal
household refrigerator usage.
The controls will be set about right when milk or juice
is as co_d as you like and when ice cream is firm.
Changing the control settings...
If you need to adjust temperatures in refrigerator or
freezer, use the settings listed in the chart below.
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed.
CONDITION: REASON:
RECOMMENDED
CONTROL SE'I-FINGS:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
If Refrigerator Section is
TOO COLD
If ICE isn't
MADE FAST ENOUGH
If BOTH SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Controls not set correctly
for your conditions
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold room temperatures
Refrigerator 4
Freezer A
Refrigerator 3
Freezer C
Refrigerator
Freezer
2
B
Refrigerator 3
Freezer C
Refrigerator
Freezer
4
B
Power Saver Control...
The Power Saver Control on the Control Console
operates electric heaters around the door openings.
These heaters help keep moisture from forming on
the outside of the refrigerator.
1. Use the "CONSUMES LESS ENERGY" setting
when humidity is low.
2. Use the "REDUCES EXTERIOR MOISTURE"
setting if moisture forms on the outside of the re-
frigerator. The indicator light will glow when the
switch is in the "REDUCES EXTERIOR MOISTURE"
position.