Video Setup; System Setup - Venturer PLV31220S1 Instruction Manual

VIDEO SETUP
1. In Stop mode, press the SETUP button.
2. Press the • orl_ button repeatedly until VIDEO SETUP
appears.
3. Use theA or • button to select the option (TV MODE,
BRIGHTNESS or CONTRAST), then press the I_
button. Use the • or 1_ button to make adjustments,
then press the ENTER button. (The screen will change
to your selected setting).
4. Repeat steps 2 and 3 above to adjust other options.
5. To exit the SETUP MENU and return to the normal screen, press the SETUP button.
Go To Video Setup Page
SYSTEM SETUP
1. In Stop mode, press the SETUP button.
2. Press the • orl_ button repeatedly until SYSTEM
SETUP appears.
3. Use the • or • button to select the option (TV
DISPLAY or DEFAULT), then press the I_ button. Use
the • or• button to make adjustments, then press
the ENTER button. (The screen will change to your
selected setting).
4. Repeat steps 2 and 3 above to adjust other options.
5. To exit the SETUP MENU and return to the normal screen, press the SETUP button.
GO TO System Page
TV TYPE
Pan Scan
• When wide-screen video is played, this mode clips the right and left
sides of the image so that it can be viewed on a conventional screen.
• Some wide-screen DVDs that do not permit Pan Scan mode playback
are automatically played in letterbox mode (black bands that appear at
the top and bottom of the screen).
Letter Box
• When wide-screen video is played in this mode on a conventional
screen, black bands appear at the top and bottom of the screen.
Wide screen
• This is the correct mode for playing wide-screen videos on the unit or
other external wide-screens.
Note:
• The displayable picture size is preset on the DVD. Therefore the playback
picture of some DVDs may not conform to the picture size you select.
• When you play DVDs recorded in the 4:3 aspect ratio, the playback
picture will always appears in the 4:3 aspect ratio regardless of the TV
TYPE setting.
• If the screen mode is still not correct, press the LCD MODE button
repeatedly to adjust it.
DEFAULT
It takes 3-5 seconds to reset the DVD settings to the factory default.
Cut off when a wide-
screen video image is
P
PAN SCAN
LETTER BOX
WIDE SCREEN
E - 30